Film Processor

A biodiesel processor is a combination reaction vessel. It is used to produce biodiesel from vegetable oil.

An industrial processor is considered suitable for production volumes, which can not produce more than 10, 000 t / year. The reaction and distillation of alcohol is a batch. The use of sedimentation to happen continuously.

In industry, a static mixer is used with the esterification catalyst called acid sulfuric acid and methanol and vegetable oil blend. The reactor is used for the esterification of free fatty acids. When, in another static mixer, an alkaline catalyst usually potassium hydroxide is used to it, this is added to the mixture of methanol and oil for the transesterification.

Now in the second reactor the process is called transesterification occurs. While the mixer thirdly, the different results of a reaction are biodiesel, glycerol and methanol solvent. It is canceled by the introduction of a simple mineral acid. The alcohol is separated into vaporizer known as flash distillation unit. The condensed vapors of methanol are sent to the receiving unit for the introduction of new cycle.

Now sales of the products remaining in the flash vaporizer namely biodiesel, glycerol, and water, are sent to the decanter continuum, apart from other biodiesel products. The phase of light that is created in the bottle is in the storage tank tot and the remaining heavy phase is sent to another storage tank for the purification of the latter. After this phase, which contains pure glycerine 80 to 90%, water and salts.

Biodiesel and glycerine purification ca be done in high vacuum evaporators. There is no typical design called as wiped film evaporator, where the products used to clearly distinguish the various salts by thermal and mechanical methods.

The amount of matter premium required to produce 1000 kg of biodiesel and 112 kg of glycerol.
It takes 1030kg of refined vegetable oil. It takes 103 kilos of methanol. Catalyst amount 6.2kg used in the process of biodiesel is sodium hydroxide or potassium hydroxide. Mineral acid required amount is 6kg

There are some other services to be put available, as,
Cooling water service 20m
350kg steam
Electricity needed 50KWh
Nitrogen to 3.2 million

If you are making biodiesel at home, you must use tallow triglyceride or animal fat or vegetable oil. You must have a solid knowledge base, hydroxide sodium or potassium hydroxide, also pure alcohol. You must have long-chain alcohol, but should be longer than isopropyl alcohol. You can use oil processing which is often obtained at restaurants.

There are different methods for biodiesel production. Generally occurs in the processor of small lots in the garage. But now some use for processors adapted to fit into the back of trucks. It's portable. One of the greatest difficulties are dealt with various biodiesel homebrewers is just to make a mid-scale biodiesel processors simple enough for cheap, safe and easy to ignore.

About the Author:

Muna wa Wanjiru Has Been Researching and Reporting on Biodiesel for Years. For More Information on Biodiesel Processor, Visit His Site at BIODIESEL PROCESSOR

Article Source: ArticlesBase.com – How to Use Biodiesel Processor for Producing Biodiesel From Vegetable Oil

Film Processor

Film Processor