Remote Switch

So you want to mount your Canon Digital SLR on a tripod to get better digital pictures. Excellent – now you need a way to trip the shutter without moving the camera. You could use the built-in self-timer, but the issue may be long gone to the fires. The Canon Remote Switch RS-80N3 can be the answer for you.

The Canon Remote Switch RS-80N3 is a very simple device – it simply connects to a compatible side (there many) Canon EOS digital SLR cameras. Compatible cameras include the Canon EOS 1D, 1Ds Mark II, 1Ds Mark II, 1Ds Mark II, 1D Mark II, 1D Mark III, 5D, 10D, 20D, 30D, 40D, D30, D60 … Port Missing N3, the series Rebelde (4xxD) models for writing this book are not compatible. Try the Canon RC-1 Wireless Remote Publication at least most of these models).

There is a button on the remote switch RS-80N3 Canon. As a camera shutter, the RS-80N3 is supporting a media outlet or full release – which triggers the shutter. In addition, the opening remote button slides forward, while pressing on – this will lock the shutter open in B (Bulb) mode (Panasonic RP).

Pictured above is the Canon Remote Switch RS-80N3 by the larger, more expensive and more capable Canon Timer Remote Controller TC-80N3. The Canon Remote Switch RS-80N3 is very light, but relatively expensive but valuable property – Is a valuable piece of equipment to have.

The RS-80N3 Remote Switch has a 2.6ft cord to prevent camera shake for super telephoto photos, Macro, exposures.The bulb and Remote Switch works like a shutter button, allowing half or full press. It also has a shutter lock release. His quick lock plug connects to the new N-3 type remote control socket

The Canon Remote Switch RS-80N3 (remote switch, 80 cm cable, plug N3) was created to midrange digital cameras and high-end Canon film and digital. It's really simple and straightforward – a small plastic box with a lock slider switch. That's all there. It is perhaps a bit big for travel but is a very comfortable size to handle and operate, I think. Use a locking ring for connecting plug-N3 to a camera, and has a small niche in the back which I think is used for storing removable rubber plugs for the cameras that have ceilings as on their terminal remote control. This period is not the right size to store the plug end of the remote control when not in use. N3 is a complement and a patented locking system socket created by Canon cameras and is not an industry standard design.

About the Author:

spravka.ua

Article Source: ArticlesBase.com – Canon Remote Switch RS-80N3 Review

Remote Switch

Remote Switch